# Ducted heat pumps for Winchester's larger homes

> Ducted heat pumps for Winchester's larger detached homes, sized room by room, with attic and basement air handlers, Eversource rates and Mass Save rebates.

URL: https://clementbostonheatpumps.com/service-areas/winchester/

Service area, Massachusetts

Ducted heat pumps for Winchester's larger detached homes, sized room by room, with attic and basement air handlers, Eversource rates and Mass Save rebates.

(857) 837-1475

Last Updated: November 12, 2026

Electric

Eversource

Rebates

Mass Save

Permits

Town of Winchester building department

Energy code

Specialized stretch code since July 1, 2025

## A typical Wedgemere whole-home heat pump

Attic heat pump air handler with upsized branches to the bedrooms over the garage

New 200-amp panel beside the basement air handler

### Two systems, one tired house

A 1930s colonial near Wedgemere heats both floors from a 24-year-old oil furnace and cools the bedrooms with an 18-year-old attic air handler. The bedrooms over the garage run cold all winter, and the house still has 100-amp service. Oil bills are the biggest winter expense in the house.

### Sizing by zone

The load calculation at 7°F comes to 51,900 BTU/h, split about 55/45. A 3-ton heat pump takes the furnace's place in the basement, and a 2-ton heat pump air handler replaces the attic AC. Two attic branches get upsized to fix the cold rooms.

### The service

Two heat pumps with backup strips are more than 100 amps can carry, so the service goes to 200 amps, scheduled with Eversource before the equipment arrives. That upgrade is its own line inside the total. The new panel sits beside the basement air handler.

### Oil out

With both floors on heat pumps, the old risers are sealed off and the furnace and tank come out, opening Mass Save's whole-home rebate through Eversource. Nine working days including the service change, $33,600 before rebates. Each zone gets its own thermostat and recorded readings.

*Project facts*

| Service | Whole-home heat pump, two zones, with a service upgrade |
| --- | --- |
| Where | Wedgemere area, Winchester |
| House | 1930s detached colonial, about 3,000 sq ft |
| Before | 24-year-old oil furnace, 18-year-old attic AC, 100-amp service |
| After | 3-ton basement and 2-ton attic heat pumps, 200-amp service |
| Price | $33,600 before rebates, service upgrade included |
| Time on site | Nine working days |

## What brings people to us in Winchester

### Oil heat downstairs, attic air upstairs

The basement furnace and the attic cooling unit both become heat pumps, each sized for its own floors, on the ducts already there.

### A 100-amp service in a big house

Two heat pumps with backup strips can outgrow it, so the panel gets checked before anything is ordered.

### An addition or whole-house renovation

Winchester's specialized code took effect July 1, 2025, and the new heat for that work is designed to it.

### A house that stays cold in one wing

A room-by-room load calculation finds the rooms the old system short-changed, and the duct fixes go on the estimate.

Count the duct systems in your Winchester house before you count the tons. [Clement Boston Heat Pumps](https://clementbostonheatpumps.com/) plans heat pump installation in Winchester, MA for existing homes, where about seven in ten are detached houses and roughly a quarter still heat with oil.

What decides those jobs is size, and in an older Winchester house, how the ducts were laid out decades ago. A big house with two duct systems needs two heat pumps, each matched to its own floors, and often an electrical service that can carry both.

## What Winchester’s new code does and doesn’t touch

Winchester’s specialized code, in effect since July 1, 2025, governs new homes and major renovations, not a heat pump replacing the heat in your current house.

For an addition or a gut renovation, the new heat is designed to the code from the first drawing, and the load calculation covers the new rooms with the old ones.

## Sizing a big Winchester house room by room

Big houses are where rule-of-thumb sizing goes wrong. A room-by-room load calculation at the design temperature sets each system’s size, and it usually lands below what a square-foot rule suggests.

### Why oversizing hurts

An oversized heat pump runs in short bursts, dries the air poorly in summer, and cycles its backup strips more than it should. Matching capacity to the measured load lets a variable-speed unit run long and slow. See our [sizing guide](https://clementbostonheatpumps.com/guide/heat-pump-sizing/) and [variable-speed guide](https://clementbostonheatpumps.com/guide/variable-speed-heat-pump/).

### Two zones, two loads

Downstairs holds the kitchen and the large living spaces, while upstairs bleeds heat through the roof. Separate heat pumps, each with its own air handler, get sized from separate numbers.

### Rooms the old system missed

A load calculation also shows which rooms the old ducts short-changed, like a bedroom over the garage or a far wing. Those duct fixes go on the estimate as their own lines; see [heat pump ductwork](https://clementbostonheatpumps.com/heat-pump-ductwork/).

## Basement oil, attic air

Where a larger house heats from a basement oil furnace and cools the second floor with an attic air handler, both pieces can become heat pumps on the ducts you have.

### The basement system

The oil furnace gives way to an air handler that connects to the existing trunk. Heat pumps push more air than oil burners, so static pressure and return size get checked before anything is reused. See [oil to heat pump conversion](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/).

### The attic system

Swap the attic cooling unit for a heat pump air handler and the bedrooms get heat of their own for the first time. Because those ducts were laid out for summer, we confirm they can move enough warm air in January. Our pages on [attic air handler heat pumps](https://clementbostonheatpumps.com/attic-air-handler-heat-pump/) and [central AC replacement](https://clementbostonheatpumps.com/replace-ac-with-heat-pump/) explain it.

### Taking the oil out

With both floors on heat pumps, the furnace and tank come out, which opens Mass Save’s whole-home rebate, paid per ton with an $8,500 cap on installs finished by December 31, 2026, and a lower cap from January 1, 2027. Our [rebate guide](https://clementbostonheatpumps.com/guide/mass-save-heat-pump-rebates/) lists the other conditions.

## Colder nights than the harbor

Winchester sits inland, between Logan Airport and Hanscom Field in Bedford. Logan’s design temperature is 7°F, and Hanscom sees about 5.3 nights a year at or below 0°F against 0.6 at Logan.

### What that means for sizing

We size a Winchester system to carry the house through a design night, then check what its output does below that. The estimate lists each unit’s capacity at 5°F, so you can see it holds up on the colder nights inland towns get.

### Backup strips

Electric strips in the air handler cover the rare night the heat pump falls short. We set a lockout so they stay off above a temperature you agree to, which keeps them from running on ordinary cold mornings. See [aux heat explained](https://clementbostonheatpumps.com/guide/heat-pump-aux-heat/).

## Lots near the lakes and the river

The Aberjona River runs through town into the Mystic Lakes, with Wedge Pond in the center. Where a lot near the water sits in a FEMA flood zone, equipment height is confirmed per address before the plan is drawn.

On wooded lots, outdoor units stay out from under trees that drop leaves and branches, with a stand above the snow line. Our [snow stand guide](https://clementbostonheatpumps.com/guide/heat-pump-snow-stand/) covers clearances.

## Electric service for two heat pumps

Two heat pumps, their air handlers and backup strips add a lot of load. Whether your service can carry it decides whether the estimate includes an upgrade.

### Doing the math

We add up what the house already runs, from the range and dryer to a car charger, then the new equipment. A 200-amp service usually has room; a 100-amp service often doesn’t once backup strips are counted.

### The upgrade

Where an upgrade is needed, it’s a separate line. Our typical range for an [electrical service upgrade](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/), usually 100 to 200 amps, is $3,000 to $6,500, with Eversource scheduling the service change.

## Utility, code and rebates in Winchester

Winchester is on Eversource for electricity and National Grid for gas. The building department issues the electrical and sheet metal permits a ducted job needs; the filing route is confirmed per address.

| What | Winchester |
| --- | --- |
| Power company | Eversource (winter heat pump rate available) |
| Gas company | National Grid |
| Code tier | Specialized, effective July 1, 2025 |
| How homes heat | Gas about 58%, oil about 24%, electricity about 15% |
| Rebates | Mass Save, Eversource as sponsor |

From November through April, the Eversource rate trims distribution and transmission on the whole household bill. For the gas majority, the switch rests more on a failing furnace and central cooling than on fuel savings.

## Visit, estimate, install: the Winchester sequence

Expect one long first visit: a zone-by-zone load calculation, pressure readings on both duct systems, a look inside the panel, and two outdoor spots chosen for airflow and distance from the neighbors.

- **Estimate:** both systems and their output at 5°F, every duct change, the service work, permit costs, which rebate applies, and the total. Our [quote checklist](https://clementbostonheatpumps.com/guide/heat-pump-quote-checklist/) shows what to compare.
- **Install:** about a week and a half for two systems with a service upgrade, less without one.
- **Start-up:** nitrogen hold, a micron-gauge vacuum, weighed refrigerant, airflow measured per zone, and both thermostats programmed; the [thermostat guide](https://clementbostonheatpumps.com/guide/heat-pump-thermostat/) explains the settings.

Next door, [Arlington](https://clementbostonheatpumps.com/service-areas/arlington/) runs a fossil-fuel-free bylaw, and [Woburn](https://clementbostonheatpumps.com/service-areas/woburn/) sits on the Aberjona just upstream.

## Services in Winchester

- [Service**Whole-home heat pumps** One ducted system that heats and cools the whole house, with the furnace or boiler retired.](https://clementbostonheatpumps.com/whole-home-heat-pump/)
- [Service**Oil to heat pump conversion** Retire the oil furnace or hydro-air boiler, cap the oil line and heat and cool through the ducts you have.](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/)
- [Service**Attic air handlers** An attic air handler that heats and cools the upper floor, with short sealed ducts and a guarded drain.](https://clementbostonheatpumps.com/attic-air-handler-heat-pump/)
- [Service**Panel and service upgrades** A service load calculation first, and a 200-amp upgrade only when the heat pump and the house need it.](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/)
- [Service**Heat pump ductwork** Duct testing, sealing, new returns and resized runs so a heat pump gets the air it needs.](https://clementbostonheatpumps.com/heat-pump-ductwork/)
- [Service**Replace AC with a heat pump** When the central AC dies, a heat pump on the same ducts cools and adds a second source of heat.](https://clementbostonheatpumps.com/replace-ac-with-heat-pump/)

## How a job usually runs in Winchester

### First call

You tell us what heats and cools the house now, which rooms aren't working, and roughly where the house is.

### Home visit

We measure the house for a load calculation, test the ducts, check the panel and look for an outdoor spot.

### Written estimate

Equipment, duct changes, electrical, permits and the rebate path, line by line, with our price.

### Install

Permits first, then the work: usually two to five working days on site.

### Commissioning

Pressure test, vacuum, charge by weight, airflow and controls set before we call it done.

## Neighborhoods, landmarks and routes

- Winchester Center
- Wedgemere
- Rangeley
- Winchester Highlands
- West Side
- Myopia Hill

### Landmarks

- Upper Mystic Lake
- Wedge Pond
- Aberjona River
- Middlesex Fells Reservation
- Winchester Town Hall

### Getting around

- Route 3 (Cambridge Street)
- Route 38 (Main Street)
- Washington Street
- Church Street
- Highland Avenue

[Open Winchester, MA in Google Maps](https://www.google.com/maps/search/?api=1&query=Winchester%2C%20MA)

## Winchester: questions

### How many heat pumps does a large Winchester house need?

Usually one per duct system. A house with a basement furnace for the first floor and an attic air handler for the second gets two, each sized from a room-by-room load calculation. Splitting the load keeps each unit running at low speed most of the winter.

### What does a whole-home heat pump cost for a bigger Winchester house?

Our typical range for a whole-home system on ducts we can reuse is $15,000 to $28,000 and up before rebates; two systems and a panel upgrade push a larger house above that. Winchester is on Eversource, so Mass Save's whole-home rebate applies when the oil system comes out.

### Does Winchester's new specialized code affect my heat pump?

Only for new construction or a major renovation. Winchester adopted the specialized energy code effective July 1, 2025. A heat pump replacing the heat in an existing house follows the ordinary permit route, through the town's building department.

### Will I need a bigger electrical service for heat pumps in Winchester?

It depends on the service you have and what else runs on it. Two heat pumps with backup strips can outgrow a 100-amp panel. Our typical range for a service upgrade, usually 100 to 200 amps, is $3,000 to $6,500, with Eversource scheduling the change.

### Can I control two heat pumps from one thermostat in Winchester?

Each system keeps its own thermostat, since each zone has its own load. Most cold-climate systems run best on the maker's own communicating control, which manages speed and backup heat; we set both and record the backup lockout temperature.

## Nearby service areas

- [Service area**Arlington** Ducted heat pumps for Arlington renovations under the fossil-fuel-free by-law and the specialized code, in bungalows, two-families and Heights colonials.](https://clementbostonheatpumps.com/service-areas/arlington/)
- [Service area**Medford** Ducted heat pumps for Medford two-families and single-families, with gas backup still allowed, the specialized energy code and National Grid rebates.](https://clementbostonheatpumps.com/service-areas/medford/)
- [Service area**Woburn** Ducted heat pumps for Woburn homes moving off oil, sized for colder inland nights, with Eversource's winter rate, Mass Save rebates and CitizenServe permits.](https://clementbostonheatpumps.com/service-areas/woburn/)

## Guides for houses in Winchester

- [Learn**What size heat pump do I need?** Why square footage and the old unit's tonnage both mislead, what a room-by-room load calculation measures, and how the result turns into equipment.](https://clementbostonheatpumps.com/guide/heat-pump-sizing/)
- [Learn**Is a variable-speed heat pump worth it?** How an inverter compressor matches its output to the house, what that does for comfort, cycling and humidity, and when a simpler unit is enough.](https://clementbostonheatpumps.com/guide/variable-speed-heat-pump/)
- [Learn**What thermostat do I need for a heat pump, and how should I set it?** The control decides whether a heat pump runs on its compressor or on expensive backup heat. Here's what it has to do and how to set it for a Massachusetts winter.](https://clementbostonheatpumps.com/guide/heat-pump-thermostat/)
- [Learn**How do Mass Save heat pump rebates work?** The three rebate tiers, the conditions behind each, the dates that change them, and what happens in towns with their own light plant.](https://clementbostonheatpumps.com/guide/mass-save-heat-pump-rebates/)
- [Decision Guide**What questions should I ask a heat pump installer before I sign?** Two quotes for the same house can describe very different jobs. These questions show you which one you're actually buying.](https://clementbostonheatpumps.com/guide/heat-pump-quote-checklist/)

## Get an estimate in Winchester

Tell us what heats the house now and which rooms aren't working in Winchester.

(857) 837-1475
