# Oil-to-heat-pump conversions for Walpole, MA homes

> Oil-to-heat-pump conversions for Walpole homes on Eversource, reusing furnace ducts where they measure up, with tank removal and panel work in one plan.

URL: https://clementbostonheatpumps.com/service-areas/walpole/

Service area, Massachusetts

Oil-to-heat-pump conversions for Walpole homes on Eversource, reusing furnace ducts where they measure up, with tank removal and panel work in one plan.

(857) 837-1475

Last Updated: November 12, 2026

Electric

Eversource

Rebates

Mass Save

Permits

Walpole Building Department (OpenGov permitting)

Energy code

Stretch energy code since January 1, 2021

## What an oil-to-heat-pump job in East Walpole looks like

New 200-amp panel beside the basement stairs

Heat pump outdoor unit on a raised stand next to the basement bulkhead

### Oil, ducts and a full panel

A 1974 garrison colonial in East Walpole heats with a 27-year-old oil furnace through ducts on both floors. The upstairs rooms never quite keep up, and the original 100-amp panel has no empty spaces. The owners want off oil without giving up the ducts they already paid for.

### What the numbers say

The house needs 33,500 BTU an hour at the design temperature, a 3-ton unit with 8 kW of backup heat. A panel load calculation puts that, plus an electric range and dryer, over 100 amps. Static pressure reads 0.92 inch with a single return, far too high for heat pump airflow.

### The work

The 200-amp service goes in first, on one day, with Eversource reconnecting. A second return in the upstairs hall, run down a linen closet, brings static to about 0.50. The air handler takes the furnace's spot on the plenum, and the outdoor unit sits on a raised stand by the bulkhead.

### Oil out, rebate in

After commissioning, the furnace and the 275-gallon tank leave under the fire department's permit. Permits go through Walpole's OpenGov portal, and the Mass Save whole-home rebate runs through Eversource. The $26,900 covers the heat pump, the second return, the 200-amp panel and the tank, with nothing left in the basement that burns oil.

*Project facts*

| Service | Oil furnace to heat pump with a 200-amp upgrade |
| --- | --- |
| Where | East Walpole |
| House | 1974 garrison colonial, about 2,100 sq ft |
| Before | 27-year-old oil furnace, 100-amp panel, basement tank |
| After | 3-ton cold-climate heat pump on existing ducts |
| Price | $26,900 before rebates, including panel and tank |
| Time on site | Five working days |

## What brings people to us in Walpole

### An oil furnace with ducts in the basement

Where the ducts measure up, the heat pump's air handler takes the furnace's spot and the job stays to a few days.

### A 100-amp panel

A whole-house heat pump plus backup heat can outgrow an older service. We check the panel on the first visit, before anything is priced.

### An oil boiler and baseboard radiators

No ducts to reuse, so the air goes through an attic or basement air handler, or a small-duct system through the walls.

### A tank you want gone

The tank comes out after the heat pump is carrying the house, with the fire department's removal permit.

When an oil furnace in Walpole gives out, the ductwork it leaves behind is often the most valuable thing in the basement. Those ducts can carry heat pump air, which keeps an oil switch to a few working days.

On every visit about heat pump installation in Walpole, MA, [Clement Boston Heat Pumps](https://clementbostonheatpumps.com/) measures whether your ducts are up to it before anything else. About 31% of Walpole homes still burn oil, well above the state’s 22%.

## Why the old furnace’s ducts matter

Reusing ducts is what separates a few days of work from a week or more. But a duct system set up for an oil furnace isn’t automatically right for a heat pump.

### What we measure

A heat pump delivers air at a lower temperature than an oil furnace, so it moves more of it. We measure static pressure, check return size against the new airflow, and look for leaks in the basement and attic.

The numbers decide whether the ducts stay as they are, get a second return, or need a section replaced.

### The common fix

An undersized return is the usual problem. Adding a return in an upstairs hall or enlarging the main one brings static pressure down, quiets the system and lets it deliver full capacity. See [heat pump ductwork](https://clementbostonheatpumps.com/heat-pump-ductwork/).

## Furnace, boiler or both: Walpole’s oil homes

Not every oil home in Walpole has ducts. Many have a boiler and baseboard radiators, and those need a different plan.

| What’s in the basement | The usual heat pump plan |
| --- | --- |
| Oil furnace and ducts | Air handler on the existing plenum after measuring |
| Oil furnace plus attic AC | Two heat pumps, one per floor, on the ducts each floor has |
| Oil boiler and baseboard | Attic and basement air handlers with new ducts, or small-duct |

In a Walpole Center house old enough to predate ducts, closets that stack between floors often carry the trunk, and the attic handles the rest.

For boiler homes, our [boiler conversion page](https://clementbostonheatpumps.com/boiler-to-heat-pump-conversion/) covers routing. For furnace homes, [oil to heat pump conversion](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/) walks through the job.

## Getting the panel ready

Older Walpole houses can have 100-amp electrical service. A whole-house heat pump with backup heat strips can be more than that service carries alongside everything else.

### When a 100-amp service is enough

A variable-speed heat pump’s running draw is modest. If the backup strips are sized small, or the house keeps another heat source, the existing service can work. We run a load calculation on the panel before deciding.

### When it isn’t

Our typical range for a 200-amp service upgrade is $3,000 to $6,500, with the utility’s own work separate. We schedule it ahead of the heat pump so you’re never without heat. See [panel upgrades for heat pumps](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/).

## What Eversource territory adds

Walpole gets its electricity from Eversource and its gas from Eversource Gas. For an oil home, that means Mass Save’s rebate comes through Eversource as the electric sponsor.

The whole-home rebate is $2,650 a ton up to $8,500 for installs through 2026, then $2,350 a ton up to $7,500 from January 1, 2027. It needs cold-climate listed equipment, an installer in Mass Save’s network, the oil system removed or disconnected, and proof of weatherization. Our [rebate guide](https://clementbostonheatpumps.com/guide/mass-save-heat-pump-rebates/) lists each condition.

### The winter rate

Once the heat pump is running, Eversource’s [winter heat pump rate](https://clementbostonheatpumps.com/guide/heat-pump-electric-rate-massachusetts/) lowers distribution and transmission charges on every household kilowatt-hour from November through April.

## Where the outdoor unit sits

A Walpole lot usually has room, so the question is which side of the house. We look for a spot clear of roof drip lines, out of the prevailing wind, and away from bedroom windows on both sides of the line.

### Snow and stands

The unit sits on a stand that keeps the coil above drifting snow and lets defrost water drain away. A short line set to the air handler keeps the refrigerant charge simple. Our [placement guide](https://clementbostonheatpumps.com/guide/heat-pump-snow-stand/) covers stand heights.

### Sound at the lot line

Walpole’s noise rules are confirmed per address. The state’s yardstick, from MassDEP, is whether the unit lifts sound at the neighbor’s house more than 10 dB(A) over the quiet background. We check the rated sound level of the unit at its low-noise setting against how far it sits from the line.

## The tank in the basement

The oil tank comes out after the heat pump is carrying the house, not before. That way you’re never left without heat if a delivery or inspection slips.

Our typical range for an accessible basement tank is $600 to $1,500, including pumping out what’s left and the fire department’s removal permit. A buried tank is priced by what it takes to reach it, and any soil testing is scoped separately. See [oil tank removal](https://clementbostonheatpumps.com/oil-tank-removal/).

## Permits and code in Walpole

Walpole’s building department takes permits through an online OpenGov portal. The town runs the stretch code and hasn’t adopted the specialized code.

| What | The Walpole answer |
| --- | --- |
| Permit route | Walpole Building Department, OpenGov portal |
| Energy code | Stretch code since January 1, 2021 |
| Electric utility | Eversource |
| Gas utility | Eversource Gas |
| Rebate program | Mass Save, Eversource as electric sponsor |
| Typical permits | Electrical, sheet metal, and gas where a line is capped |

Local noise rules and fees are confirmed per address when we file. The [cost guide](https://clementbostonheatpumps.com/guide/heat-pump-installation-cost-massachusetts/) sets out how each part of the price is built.

## The visit, the estimate and the install days

Walpole sits inland, where winter nights run colder than at Logan. The first visit starts with a room-by-room load calculation at your town’s design temperature.

1. **First visit:** load calculation, duct static and leakage, panel, tank access and an outdoor spot on a stand above the snow line.
2. **Written estimate:** equipment with its capacity at 5°F, duct changes, electrical, tank, permits, rebate path and price, line by line.
3. **Install:** four to six working days on existing ducts, including the panel and tank.
4. **Before we leave:** the line set holds a nitrogen test, the system is pulled under 500 microns and charged to the scale, airflow and static are read at the air handler, and the [backup heat lockout](https://clementbostonheatpumps.com/guide/heat-pump-aux-heat/) is set and written on the start-up sheet.

[Sharon](https://clementbostonheatpumps.com/service-areas/sharon/) shares Walpole’s Eversource service, while [Norwood](https://clementbostonheatpumps.com/service-areas/norwood/) runs its own light plant and rebate.

## Services in Walpole

- [Service**Oil to heat pump conversion** Retire the oil furnace or hydro-air boiler, cap the oil line and heat and cool through the ducts you have.](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/)
- [Service**Oil tank removal** The old basement tank pumped, cleaned, removed and permitted once the heat pump is running.](https://clementbostonheatpumps.com/oil-tank-removal/)
- [Service**Panel and service upgrades** A service load calculation first, and a 200-amp upgrade only when the heat pump and the house need it.](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/)
- [Service**Whole-home heat pumps** One ducted system that heats and cools the whole house, with the furnace or boiler retired.](https://clementbostonheatpumps.com/whole-home-heat-pump/)
- [Service**Boiler to heat pump conversion** New ducts or small-duct high-velocity runs so a heat pump can heat and cool a radiator house.](https://clementbostonheatpumps.com/boiler-to-heat-pump-conversion/)
- [Service**Heat pump ductwork** Duct testing, sealing, new returns and resized runs so a heat pump gets the air it needs.](https://clementbostonheatpumps.com/heat-pump-ductwork/)

## How a job usually runs in Walpole

### First call

You tell us what heats and cools the house now, which rooms aren't working, and roughly where the house is.

### Home visit

We measure the house for a load calculation, test the ducts, check the panel and look for an outdoor spot.

### Written estimate

Equipment, duct changes, electrical, permits and the rebate path, line by line, with our price.

### Install

Permits first, then the work: usually two to five working days on site.

### Commissioning

Pressure test, vacuum, charge by weight, airflow and controls set before we call it done.

## Neighborhoods, landmarks and routes

- Walpole Center
- East Walpole
- South Walpole
- North Walpole

### Landmarks

- Francis William Bird Park
- Neponset River
- Walpole Town Forest
- Walpole station

### Getting around

- Route 1A
- Route 27
- Route 1
- Main Street

[Open Walpole, MA in Google Maps](https://www.google.com/maps/search/?api=1&query=Walpole%2C%20MA)

## Walpole: questions

### Can the ducts from my Walpole oil furnace be reused for a heat pump?

Often, once we measure them. We check static pressure, return size and leakage on the first visit. A heat pump moves more air than many oil furnaces, so an undersized return is the most common fix, not a new duct system.

### What does it cost to switch a Walpole oil furnace to a heat pump?

On ducts we can reuse, our typical range is $15,000 to $28,000 and up before rebates. A 200-amp service upgrade, when needed, runs $3,000 to $6,500, and an accessible basement tank comes out for $600 to $1,500. Mass Save's rebate comes through Eversource.

### Do I need a new electrical panel for a heat pump in Walpole?

Not always. A variable-speed heat pump draws less at its peak than many people expect, and some 100-amp services can carry it. The backup heat strips are what push a small panel over, so we run the load numbers before deciding.

### Who issues heat pump permits in Walpole?

Walpole's building department, through its OpenGov online portal. A ducted heat pump needs an electrical permit and a sheet metal permit for the ducts. Fees and any local noise rules are confirmed per address.

### Does Walpole require all-electric heat in new homes?

No. Walpole has run the stretch code since January 1, 2021 and has not adopted the specialized code, so new homes and major renovations can still be designed with fossil fuel equipment. An existing home's heating swap isn't affected either way.

## Nearby service areas

- [Service area**Norwood** Ducted heat pumps for Norwood capes, two-families and condos, with Norwood Light or Mass Save rebates matched to your heating fuel and the specialized code.](https://clementbostonheatpumps.com/service-areas/norwood/)
- [Service area**Sharon** Ducted heat pumps for Sharon's gas-heated colonials and oil homes, with Eversource rebates and the specialized code the town adopted on January 1, 2025.](https://clementbostonheatpumps.com/service-areas/sharon/)
- [Service area**Medfield** Ducted heat pumps for Medfield colonials heated by oil or propane, compared honestly against a gas conversion, with Eversource rebates and winter rates.](https://clementbostonheatpumps.com/service-areas/medfield/)

## Guides for houses in Walpole

- [Decision Guide**Is a heat pump better than oil heat in Massachusetts?** Running cost worked out from Massachusetts fuel prices and winter heat pump rates, plus the comfort, cooling, tank and hot water questions that come with the switch.](https://clementbostonheatpumps.com/guide/heat-pump-vs-oil-heat/)
- [Cost Guide**How much does heat pump installation cost in Massachusetts?** Our typical ranges for Boston-area ducted heat pump jobs, what's inside the price, and what rebates do to it.](https://clementbostonheatpumps.com/guide/heat-pump-installation-cost-massachusetts/)
- [Learn**How do Mass Save heat pump rebates work?** The three rebate tiers, the conditions behind each, the dates that change them, and what happens in towns with their own light plant.](https://clementbostonheatpumps.com/guide/mass-save-heat-pump-rebates/)
- [Learn**Why does my heat pump's aux heat keep coming on?** Backup heat is part of every cold-climate system. Here's when it should run, when it shouldn't, and the settings that decide which.](https://clementbostonheatpumps.com/guide/heat-pump-aux-heat/)
- [Decision Guide**What questions should I ask a heat pump installer before I sign?** Two quotes for the same house can describe very different jobs. These questions show you which one you're actually buying.](https://clementbostonheatpumps.com/guide/heat-pump-quote-checklist/)

## Get an estimate in Walpole

Tell us what heats the house now and which rooms aren't working in Walpole.

(857) 837-1475
