# Ducted heat pumps for Lynn three-deckers and houses

> Ducted heat pumps for Lynn three-deckers, two-families and shore houses, with permits through Lynn's online ISD portal and National Grid rebates.

URL: https://clementbostonheatpumps.com/service-areas/lynn/

Service area, Massachusetts

Ducted heat pumps for Lynn three-deckers, two-families and shore houses, with permits through Lynn's online ISD portal and National Grid rebates.

(857) 837-1475

Last Updated: November 12, 2026

Electric

National Grid

Rebates

Mass Save

Permits

Lynn Inspectional Services Department

Energy code

Stretch code since January 1, 2020 (not the specialized code)

## What a top-floor heat pump job in the Lynn Highlands looks like

Horizontal air handler on a platform in the low attic of the three-decker

Outdoor unit on a raised stand in the narrow rear yard beside the porch stairs

### The top floor first

The owner of a 1910s three-decker lives on the third floor, which is the coldest unit in January and the hottest in July. One oil steam boiler heats all three floors, and converting the whole building at once is more than the owner wants to take on this year.

### Working from a low attic

A 2-ton horizontal air handler goes on a platform in the attic, which has about four feet of headroom at the peak. Six short insulated ceiling branches and a hall return reach every room, so nothing changes on the floors below and the shared boiler keeps heating them.

### Radiators stay as backup

The third floor's radiators stay connected, and the controls bring them on only on the coldest nights. That leaves the steam system balanced for the other units and puts the job on Mass Save's partial-home path. The outdoor unit sits on a raised stand clear of the porch stairs, with a 42-foot line set up the rear wall.

### Permits in days

Lynn's ISD aims to issue sheet metal permits in two to three days through its portal, so the four days on site follow the signed estimate closely. The lower floors can convert later on their own systems, each sized to its own floor, and the shared boiler comes out only when the last unit no longer needs it.

*Project facts*

| Service | Attic air handler heat pump, top floor |
| --- | --- |
| Where | The Highlands, Lynn |
| House | 1910s three-decker, third-floor unit about 1,050 sq ft |
| Before | Shared oil steam boiler, window AC |
| After | 2-ton attic heat pump, radiators as backup |
| Price | $22,600 before rebates |
| Time on site | Four working days |

## What brings people to us in Lynn

### The top floor of a three-decker

The roof makes the top unit the hardest to heat and the hottest in July. An attic air handler gives it ducted heat and cooling without touching the floors below.

### One oil boiler for the whole building

Each unit can move to its own heat pump on its own schedule, with the boiler kept for the others until the last floor converts.

### A house a few blocks from the water

Near Lynn Shore Drive and the Diamond District, onshore wind and salt decide which side of the house the outdoor unit faces.

Lynn’s Inspectional Services Department aims to issue a sheet metal permit in two to three days, so paperwork rarely holds up a job here. At [Clement Boston Heat Pumps](https://clementbostonheatpumps.com/), our heat pump installation in Lynn, MA puts the planning into the buildings instead: three-deckers, two-families and older houses near the shore.

About 17% of Lynn homes sit in three- or four-unit buildings, close to four times the national share. Most of them were built before 1940 for radiators, not ducts.

## Permits move quickly; buildings take the planning

Because the permit side is predictable, a Lynn job’s schedule depends on the building: how many units share the heat, where the ducts can run and who owns the yard.

### Lynn’s permit route

Lynn’s ISD takes applications and payments through an online portal. Its published goals are one to five days for an electrical permit and two to three days for sheet metal and mechanical permits.

A ducted heat pump job needs the electrical permit and the sheet metal permit for the ducts; a gas permit is added if a gas line gets capped. We file once the written estimate is signed, and the install date follows the permits. Our [installation process guide](https://clementbostonheatpumps.com/guide/heat-pump-installation-process/) lays out the steps.

### Shared boilers in multi-family buildings

Many Lynn three-deckers still run all three floors off one boiler. Converting the whole building at once is a large job, so an owner can start with one floor, often the top one, where the roof makes winters coldest and summers hottest.

That floor’s radiators can stay connected as backup heat while the heat pump carries the load. Mass Save treats that as a partial-home system; see [dual fuel heat pumps](https://clementbostonheatpumps.com/dual-fuel-heat-pump/).

## Three-deckers, floor by floor

Each floor of a three-decker loses heat differently, so each gets its own system and its own load calculation. The [three-decker guide](https://clementbostonheatpumps.com/guide/triple-decker-heat-pumps/) goes deeper.

| Floor | Where the air handler goes | Typical duct route |
| --- | --- | --- |
| Top | Attic, on a platform | Down through the ceilings |
| Middle | A closet, or a small-duct air handler | Short runs in a soffit or dropped hall ceiling |
| First | Basement | Up through floor registers |

### The top floor

An [attic air handler](https://clementbostonheatpumps.com/attic-air-handler-heat-pump/) feeds each room from above through short insulated branches. Because the ducts sit in the attic, we seal and insulate them well; leaky attic ducts waste the heat before it reaches the room.

### The middle floor

The middle unit has no attic or basement of its own. A closet air handler with runs above a dropped hallway ceiling, or a small-duct high-velocity system, reaches most rooms. See [heat pump ductwork](https://clementbostonheatpumps.com/heat-pump-ductwork/).

### The first floor

The basement gives the first floor the easiest route: an air handler near the old boiler, a trunk along the joists and registers cut into the floor. If the boiler still serves the floors above, we plan the new equipment around it so both stay serviceable until the last unit converts.

## Oil, gas and the shore

Gas heats about 57% of Lynn homes, electricity about 22% and oil about 17%. The fuel you’re leaving decides both the rebate path and how fast the savings show up.

### Moving off oil

Oil costs more per unit of heat than a heat pump on National Grid’s winter rate. A single-family in Wyoma or Lynnhurst on an oil furnace with good ducts is a strong candidate for a full conversion, with the tank removed afterward. See [oil to heat pump](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/) and [oil tank removal](https://clementbostonheatpumps.com/oil-tank-removal/).

### Leaving a gas boiler

A gas boiler is cheaper to run than oil, so the case rests more on cooling, comfort and the boiler’s age. The [heat pump vs boiler guide](https://clementbostonheatpumps.com/guide/heat-pump-vs-boiler/) compares them, and the [backup heat guide](https://clementbostonheatpumps.com/guide/heat-pump-aux-heat/) explains when radiators or strips take over.

### Salt and wind near the water

Lynn is a coastal community, and houses near Lynn Shore Drive, Red Rock Park and the Diamond District take onshore wind and salt. We keep units out of direct spray and set them where rain can rinse the coil, choosing a coastal-protected model where the maker offers one.

## Single-family houses in Lynn

About 35% of Lynn homes are detached houses, from capes and ranches near Lynn Woods to older colonials in the Highlands. They follow the same method as the multi-family stock, with one system sized for the whole house.

### Reusing the ducts you have

A house that already has a furnace and central air may be able to keep its ducts. We measure static pressure, check the return and look for leaks before deciding; undersized returns are a common reason a heat pump runs loud or short of heat. See [whole-home heat pumps](https://clementbostonheatpumps.com/whole-home-heat-pump/).

### Sizing for a cold night

Lynn sits on the coast, so its coldest nights are milder than inland towns, but a load calculation still runs at the local design temperature. We size for the coldest expected night and choose equipment by its capacity at 5°F, not its nameplate rating.

## Who pays what in Lynn: Mass Save and permits

National Grid supplies both electricity and gas in Lynn, so Mass Save rebates run through National Grid whichever fuel you’re replacing.

| What | The Lynn picture |
| --- | --- |
| Permit office | Lynn ISD, online portal |
| Sheet metal and mechanical permit goal | 2 to 3 days |
| Electrical permit goal | 1 to 5 days |
| Energy code | Stretch code since January 1, 2020; not the specialized code |
| Electric and gas utility | National Grid |
| Homes built before 1940 | 45.7% |

National Grid’s winter heat pump rate lowers distribution charges from November through April. Before you sign anything, our [quote checklist](https://clementbostonheatpumps.com/guide/heat-pump-quote-checklist/) lists what a written estimate should show.

## From first call to commissioning in Lynn

The first visit measures each floor’s heat loss, checks the attic and basement for duct routes, looks at the panel and finds an outdoor spot out of the wind and clear of the porch stairs.

- **Written estimate:** equipment with capacity at 5°F, ducts, electrical, permits, rebate tier and price, floor by floor.
- **Permits:** filed through the ISD portal, typically issued within days.
- **Install,** usually three to eight working days per floor, depending on new ducts.
- **Commissioning:** nitrogen pressure test, vacuum below 500 microns, charge by weight, measured airflow, and the backup heat lockout set and recorded.

[Saugus](https://clementbostonheatpumps.com/service-areas/saugus/) borders Lynn to the west, and [Swampscott](https://clementbostonheatpumps.com/service-areas/swampscott/) shares its shoreline to the east.

## Services in Lynn

- [Service**Attic air handlers** An attic air handler that heats and cools the upper floor, with short sealed ducts and a guarded drain.](https://clementbostonheatpumps.com/attic-air-handler-heat-pump/)
- [Service**Boiler to heat pump conversion** New ducts or small-duct high-velocity runs so a heat pump can heat and cool a radiator house.](https://clementbostonheatpumps.com/boiler-to-heat-pump-conversion/)
- [Service**Oil to heat pump conversion** Retire the oil furnace or hydro-air boiler, cap the oil line and heat and cool through the ducts you have.](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/)
- [Service**Dual fuel heat pumps** A heat pump paired with the furnace you keep, with one control deciding which one heats.](https://clementbostonheatpumps.com/dual-fuel-heat-pump/)
- [Service**Heat pump ductwork** Duct testing, sealing, new returns and resized runs so a heat pump gets the air it needs.](https://clementbostonheatpumps.com/heat-pump-ductwork/)
- [Service**Oil tank removal** The old basement tank pumped, cleaned, removed and permitted once the heat pump is running.](https://clementbostonheatpumps.com/oil-tank-removal/)

## How a job usually runs in Lynn

### First call

You tell us what heats and cools the house now, which rooms aren't working, and roughly where the house is.

### Home visit

We measure the house for a load calculation, test the ducts, check the panel and look for an outdoor spot.

### Written estimate

Equipment, duct changes, electrical, permits and the rebate path, line by line, with our price.

### Install

Permits first, then the work: usually two to five working days on site.

### Commissioning

Pressure test, vacuum, charge by weight, airflow and controls set before we call it done.

## Neighborhoods, landmarks and routes

- Downtown Lynn
- Diamond District
- Highlands
- West Lynn
- East Lynn
- Wyoma
- Lynnhurst
- Pine Hill

### Landmarks

- Lynn Woods Reservation
- Lynn Shore Drive
- Red Rock Park
- High Rock Tower
- Lynn Heritage State Park

### Getting around

- Route 1A
- Route 129
- Route 107
- Lynnway
- Western Avenue

[Open Lynn, MA in Google Maps](https://www.google.com/maps/search/?api=1&query=Lynn%2C%20MA)

## Lynn: questions

### How fast does Lynn issue a sheet metal permit for a heat pump?

Lynn's Inspectional Services Department publishes a goal of two to three days for sheet metal and mechanical permits and one to five days for electrical permits, filed through its online portal. Inspections are booked once the work is ready.

### Can one unit in my Lynn three-decker switch to a heat pump on its own?

Yes. Each floor can get its own ducted system while the shared boiler keeps heating the other units. The converted floor's radiators can stay as backup, which puts it in Mass Save's partial-home tier rather than whole-home.

### What does a heat pump cost for one floor of a Lynn three-decker?

A top-floor unit with an attic air handler and new ducts falls in our typical range of $20,000 to $40,000 and up before rebates, toward the lower end for one floor. Where ducts already exist, our typical range is $15,000 to $28,000 and up. The written estimate sets the price.

### Does Lynn require the specialized energy code for my renovation?

No. Lynn has followed the stretch energy code since January 1, 2020 and has not adopted the specialized code. A renovation can still be designed with gas backup, subject to the stretch code's paths.

### Is my Lynn house in a flood zone that affects the outdoor unit?

Lynn is one of the state's coastal communities, but flood zones are mapped parcel by parcel. We check your address; where a zone applies, the building code's flood provisions raise the equipment above the design flood level.

## Nearby service areas

- [Service area**Saugus** Ducted heat pumps for Saugus homes with oil furnaces and existing ducts, on National Grid with Mass Save rebates, the winter rate and marsh-side placement.](https://clementbostonheatpumps.com/service-areas/saugus/)
- [Service area**Swampscott** Ducted heat pumps for Swampscott homes on propane, oil or gas, with outdoor units placed for salt air and wind, National Grid rebates and online permits.](https://clementbostonheatpumps.com/service-areas/swampscott/)
- [Service area**Revere** Ducted heat pumps for Revere homes from Beachmont to Point of Pines, mounted for salt air and flood zones, with National Grid rebates and CitizenServe permits.](https://clementbostonheatpumps.com/service-areas/revere/)

## Guides for houses in Lynn

- [Decision Guide**How do you put heat pumps in a triple-decker?** Three stacked homes under one roof, often with three owners, three meters and one narrow side yard. Here's how a heat pump job works around that.](https://clementbostonheatpumps.com/guide/triple-decker-heat-pumps/)
- [Learn**What happens during a heat pump installation?** Each step in a ducted install depends on the one before it. Here's the order, why it runs that way, and how you can tell the job was done right.](https://clementbostonheatpumps.com/guide/heat-pump-installation-process/)
- [Decision Guide**Should I replace my boiler with a heat pump?** Radiator heat is comfortable and long-lived; a ducted heat pump adds cooling and drops the fuel. The ducts are what decide whether the switch is worth it.](https://clementbostonheatpumps.com/guide/heat-pump-vs-boiler/)
- [Learn**Why does my heat pump's aux heat keep coming on?** Backup heat is part of every cold-climate system. Here's when it should run, when it shouldn't, and the settings that decide which.](https://clementbostonheatpumps.com/guide/heat-pump-aux-heat/)
- [Decision Guide**What questions should I ask a heat pump installer before I sign?** Two quotes for the same house can describe very different jobs. These questions show you which one you're actually buying.](https://clementbostonheatpumps.com/guide/heat-pump-quote-checklist/)

## Get an estimate in Lynn

Tell us what heats the house now and which rooms aren't working in Lynn.

(857) 837-1475
