# Cold-climate ducted heat pumps for Lexington, MA

> Cold-climate ducted heat pumps for Lexington homes on oil, propane or gas, sized for Hanscom-area winters and planned around the town's fossil-fuel-free bylaw.

URL: https://clementbostonheatpumps.com/service-areas/lexington/

Service area, Massachusetts

Cold-climate ducted heat pumps for Lexington homes on oil, propane or gas, sized for Hanscom-area winters and planned around the town's fossil-fuel-free bylaw.

(857) 837-1475

Last Updated: November 12, 2026

Electric

Eversource

Rebates

Mass Save

Permits

Town of Lexington building department

Energy code

Specialized stretch code since January 1, 2024

## Inside a North Lexington oil-to-heat-pump conversion

New supply registers along the family-room ceiling

Outdoor unit on an 18-inch stand at the rear of the house

### A renovation that changes the heat

A 1958 North Lexington colonial is getting a new kitchen and family room, enough to count as a major renovation. Under the town's fossil-fuel-free bylaw, a new oil, gas or propane furnace isn't an option, and the 28-year-old oil furnace is due anyway. Dual fuel is off the table, so the heat pump stands alone.

### Sized for Hanscom's cold

With no fossil backup allowed, the heat pump has to carry the house on its own. Hanscom Field, next door, averages about five nights a year at or below zero, so we choose the 4-ton unit on its capacity at 5°F against the room-by-room load, not its nameplate.

### Using the open walls

The existing trunk reaches every room once extended. Three new branches and a return go into the renovated rooms while the framing is open, timed to the general contractor's schedule. The outdoor unit sits on an 18-inch stand at the rear, above the snow and off the roof's drip line.

### Oil out, paperwork in

The furnace, AC condenser and 275-gallon tank come out, the tank under a fire department permit. Building, electrical and sheet metal permits go through the town's online system, and Eversource sponsors the whole-home rebate for replacing oil. After drywall, we measure airflow, commission the system and record the strip heat lockout temperature.

*Project facts*

| Service | Oil-to-heat-pump conversion during a renovation |
| --- | --- |
| Where | North Lexington |
| House | 1958 colonial, about 2,500 sq ft |
| Before | Oil furnace, central AC |
| After | 4-ton cold-climate heat pump, no fossil backup |
| Price | $27,600 before rebates, tank removal included |
| Time on site | Six working days, around the renovation |

## What brings people to us in Lexington

### An oil or propane furnace

More than a third of Lexington homes burn oil or propane. Both qualify for Mass Save's whole-home rebate through Eversource.

### A major renovation or addition

The fossil-fuel-free bylaw keeps new gas, oil and propane equipment out of new buildings and major renovations, so the heat pump carries the house alone.

### Cold, clear January nights

Hanscom Field, on the town line, sees about nine times as many sub-zero nights as Logan, so the system is sized for the cold, not the coast.

### A mid-century house with no basement ducts

Slab floors and low attics need the ducts planned around the structure, often with a small-duct or attic system.

Lexington asks more of a heat pump than Boston does. [Clement Boston Heat Pumps](https://clementbostonheatpumps.com/) handles heat pump installation in Lexington, MA, where the winter nights run colder, more homes burn oil and propane, and a town bylaw keeps new fossil-fuel equipment out of new homes and major renovations.

Each of those three facts pushes the same way: the heat pump has to carry the whole house on the coldest night, without help from a furnace.

## Colder nights next to Hanscom Field

Lexington sits inland, beside Hanscom Field. That station averages 5.3 nights a year at or below 0°F; Logan averages 0.6. The heat pump has to be sized for the inland number.

### What the cold changes

Hanscom also logs about 19 nights a year at or below 10°F, against about seven at Logan, and roughly 8% more heating degree days. A system sized on Boston’s coastal design temperature runs short on those nights and hands the load to electric backup strips.

### How we size for it

- **Room-by-room Manual J load,** at the design temperature for your address, not the coast’s.
- **Capacity at 5°F** listed on the estimate, from the maker’s cold-climate data, so you can see what the unit delivers on a sub-zero night.
- **Backup lockout,** set so strips only run when the heat pump truly can’t keep up; see our [aux heat guide](https://clementbostonheatpumps.com/guide/heat-pump-aux-heat/).

Our [sizing guide](https://clementbostonheatpumps.com/guide/heat-pump-sizing/) explains the method, and [do heat pumps work in Massachusetts](https://clementbostonheatpumps.com/guide/do-heat-pumps-work-in-massachusetts/) covers cold-climate performance.

## When the fossil-fuel-free bylaw applies

Lexington is one of the towns in the state’s fossil-fuel-free demonstration program. Its bylaw took effect June 22, 2024, with an amendment effective January 1, 2025, and it covers new buildings and major renovations.

### Renovations and additions

If your project counts as a major renovation, the new heat is electric. A gas or propane furnace kept as backup isn’t available for that work, so dual fuel is off the table and the heat pump is sized to carry every night alone. That makes the cold-climate sizing above more than a preference.

### Straight replacements

Replacing an old furnace or boiler in a house you’re not renovating is a different case. We confirm with the permit which one your project is, before the equipment is chosen.

## Oil and propane: over a third of homes

About 31% of Lexington homes burn oil and another 6% propane, well above the state’s 22% oil share. Those homes pay the most per unit of heat, and they get the biggest rebate.

### Oil and propane homes

Both qualify for Mass Save’s whole-home rebate through Eversource: $2,650 per ton up to $8,500, becoming $2,350 per ton up to $7,500 from January 1, 2027. A propane supplier collects its own tank once the furnace is gone.

The oil tank comes out with the burner; our typical range for an accessible basement tank is $600 to $1,500, plus the fire department’s permit. See [oil to heat pump conversion](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/) and the [heat pump vs oil guide](https://clementbostonheatpumps.com/guide/heat-pump-vs-oil-heat/).

### Gas homes

Gas heats about 48% of the town. National Grid sells the gas and sponsors Mass Save’s gas side, so a gas home that removes its furnace qualifies for the same whole-home rebate. Eversource’s winter heat pump rate, which lowers distribution and transmission charges from November through April, narrows the running-cost gap.

## Colonials, capes and mid-century houses

Close to three-quarters of Lexington homes are detached houses, and only about one in five predates 1940. The layout of the house, more than its age, decides where the ducts go.

### Colonials and capes with a furnace

A warm-air furnace already has ducts. We measure static pressure and return size, since a heat pump moves more air at a gentler temperature, and add a second zone in the attic where the bedrooms run hot or cold. See [furnace to heat pump conversion](https://clementbostonheatpumps.com/furnace-to-heat-pump-conversion/).

### Mid-century houses

Some of Lexington’s post-war modern houses sit on slabs, with low-pitched roofs and baseboard or radiant heat. With no basement, ducts run through a low attic, a soffit or a small-duct system. The [ductwork page](https://clementbostonheatpumps.com/heat-pump-ductwork/) covers those routes.

### Older houses near the Center

Lexington’s older houses near the Battle Green and along Massachusetts Avenue often heat with radiators. An [attic air handler](https://clementbostonheatpumps.com/attic-air-handler-heat-pump/) for the bedrooms and a basement unit for the first floor is the usual layout.

### Condos and townhouses

About one Lexington home in eight sits in a building of five or more units. A compact air handler in a closet replaces baseboard or an old furnace, and the association decides where the outdoor unit goes; see our [condo guide](https://clementbostonheatpumps.com/guide/condo-heat-pump-replacement/).

### Panels in older houses

A heat pump that carries the whole house on a sub-zero night is a big electrical load, and some older Lexington houses still have 100-amp service. We check the panel on the first visit; if the service has to grow, our typical range for an [electrical service upgrade](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/) is $3,000 to $6,500.

## Paperwork, rebates and code in Lexington

Lexington takes permits through an online permit system. The electrical and sheet metal permits cover most jobs, with a building permit when the work is part of a renovation.

| What | The Lexington figure |
| --- | --- |
| Electric company | Eversource |
| Gas company | National Grid |
| Fossil-fuel-free bylaw | Effective June 22, 2024; amended January 1, 2025 |
| Energy code | Specialized stretch code since January 1, 2024 |
| Heating fuel | Gas 48%, oil 31%, electricity 14%, propane 6% |
| Nights at or below 0°F | About 5 a year at Hanscom, under 1 at Logan |

Fees and local placement rules for the outdoor unit are confirmed per address. The [rebate guide](https://clementbostonheatpumps.com/guide/mass-save-heat-pump-rebates/) lists every Mass Save condition.

## What to expect on a Lexington job

The first visit starts with the bylaw question, then measures what the estimate depends on: room-by-room heat loss, the ducts or new routes, the panel, and an outdoor spot above the snow line.

1. **Written estimate:** equipment with its 5°F capacity, duct work, electrical, tank removal, permits, the rebate path and the price.
2. **Permits** through the town’s online system.
3. **Install:** four to seven working days, longer for new ducts or renovation timing.
4. **Commissioning:** nitrogen pressure test, vacuum below 500 microns, charge by weight, measured airflow, and the backup lockout set for an inland winter.

[Arlington](https://clementbostonheatpumps.com/service-areas/arlington/) shares Lexington’s fossil-fuel-free approach, while [Bedford](https://clementbostonheatpumps.com/service-areas/bedford/) is a comparison town where dual fuel is still allowed.

## Services in Lexington

- [Service**Oil to heat pump conversion** Retire the oil furnace or hydro-air boiler, cap the oil line and heat and cool through the ducts you have.](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/)
- [Service**Whole-home heat pumps** One ducted system that heats and cools the whole house, with the furnace or boiler retired.](https://clementbostonheatpumps.com/whole-home-heat-pump/)
- [Service**Furnace to heat pump conversion** Take out the gas or propane furnace and heat and cool through the same ducts with a heat pump.](https://clementbostonheatpumps.com/furnace-to-heat-pump-conversion/)
- [Service**Heat pump ductwork** Duct testing, sealing, new returns and resized runs so a heat pump gets the air it needs.](https://clementbostonheatpumps.com/heat-pump-ductwork/)
- [Service**Attic air handlers** An attic air handler that heats and cools the upper floor, with short sealed ducts and a guarded drain.](https://clementbostonheatpumps.com/attic-air-handler-heat-pump/)
- [Service**Oil tank removal** The old basement tank pumped, cleaned, removed and permitted once the heat pump is running.](https://clementbostonheatpumps.com/oil-tank-removal/)

## How a job usually runs in Lexington

### First call

You tell us what heats and cools the house now, which rooms aren't working, and roughly where the house is.

### Home visit

We measure the house for a load calculation, test the ducts, check the panel and look for an outdoor spot.

### Written estimate

Equipment, duct changes, electrical, permits and the rebate path, line by line, with our price.

### Install

Permits first, then the work: usually two to five working days on site.

### Commissioning

Pressure test, vacuum, charge by weight, airflow and controls set before we call it done.

## Neighborhoods, landmarks and routes

- Lexington Center
- East Lexington
- North Lexington
- Meriam Hill
- Five Fields
- Follen Hill
- Turning Mill

### Landmarks

- Lexington Battle Green
- Buckman Tavern
- Hancock-Clarke House
- Minute Man National Historical Park
- Minuteman Bikeway

### Getting around

- Massachusetts Avenue
- Route 2
- Route 2A
- Route 4/225 (Bedford Street)
- Route 128 / I-95

[Open Lexington, MA in Google Maps](https://www.google.com/maps/search/?api=1&query=Lexington%2C%20MA)

## Lexington: questions

### Can I keep a gas furnace as backup during a Lexington renovation?

Not inside a major renovation or a new building. Lexington's fossil-fuel-free bylaw, effective June 22, 2024 and amended January 1, 2025, keeps new fossil-fuel equipment out of that work. A straight heating replacement outside a major renovation is a different case, which we confirm with the permit.

### Will a heat pump keep a Lexington house warm below zero?

Yes, if it's sized for it. Hanscom Field averages about five nights a year at or below 0°F. We size at the design temperature for your address and list the unit's capacity at 5°F on the estimate, so backup heat is a short-term helper, not the plan.

### What does a ducted heat pump cost to replace oil in Lexington?

Where the existing ducts can be reused, our typical range for a whole-home system is $15,000 to $28,000 and up before rebates. Lexington is Eversource territory, so replacing oil or propane qualifies for Mass Save's whole-home rebate. Your written estimate sets the price.

### Who sponsors the Mass Save rebate for a Lexington home on gas?

National Grid, which is Lexington's gas company and a Mass Save gas sponsor. Eversource sponsors the electric side for oil, propane and baseboard homes. The equipment, installer and weatherization rules are the same either way.

### How do I file heat pump permits in Lexington?

Lexington takes building, electrical and sheet metal permits through its online permit system. We file them for the job before work starts; the fees and any local placement rules for the outdoor unit are confirmed per address.

## Nearby service areas

- [Service area**Arlington** Ducted heat pumps for Arlington renovations under the fossil-fuel-free by-law and the specialized code, in bungalows, two-families and Heights colonials.](https://clementbostonheatpumps.com/service-areas/arlington/)
- [Service area**Bedford** Ducted heat pumps for Bedford homes, sized for Hanscom Field's colder nights, with Mass Save rebates through Eversource and dual fuel still allowed here.](https://clementbostonheatpumps.com/service-areas/bedford/)
- [Service area**Burlington** Ducted heat pumps for Burlington's postwar ranches and colonials, reusing furnace and AC ducts, with Mass Save rebates and Eversource's winter heat pump rate.](https://clementbostonheatpumps.com/service-areas/burlington/)

## Guides for houses in Lexington

- [Learn**Do heat pumps work in Massachusetts?** What a Boston-area winter asks of a heat pump, how cold-climate equipment is rated, and what changes inland, in snow and on the coldest nights.](https://clementbostonheatpumps.com/guide/do-heat-pumps-work-in-massachusetts/)
- [Learn**What size heat pump do I need?** Why square footage and the old unit's tonnage both mislead, what a room-by-room load calculation measures, and how the result turns into equipment.](https://clementbostonheatpumps.com/guide/heat-pump-sizing/)
- [Learn**Why does my heat pump's aux heat keep coming on?** Backup heat is part of every cold-climate system. Here's when it should run, when it shouldn't, and the settings that decide which.](https://clementbostonheatpumps.com/guide/heat-pump-aux-heat/)
- [Learn**How do Mass Save heat pump rebates work?** The three rebate tiers, the conditions behind each, the dates that change them, and what happens in towns with their own light plant.](https://clementbostonheatpumps.com/guide/mass-save-heat-pump-rebates/)
- [Decision Guide**Is a heat pump better than oil heat in Massachusetts?** Running cost worked out from Massachusetts fuel prices and winter heat pump rates, plus the comfort, cooling, tank and hot water questions that come with the switch.](https://clementbostonheatpumps.com/guide/heat-pump-vs-oil-heat/)

## Get an estimate in Lexington

Tell us what heats the house now and which rooms aren't working in Lexington.

(857) 837-1475
