# Heat pumps for Hanover, MA ranches and colonials leaving oil

> Ducted heat pumps for Hanover's postwar ranches and colonials leaving oil, with National Grid rebates, panel checks and duct fixes settled on the first visit.

URL: https://clementbostonheatpumps.com/service-areas/hanover/

Service area, Massachusetts

Ducted heat pumps for Hanover's postwar ranches and colonials leaving oil, with National Grid rebates, panel checks and duct fixes settled on the first visit.

(857) 837-1475

Last Updated: November 12, 2026

Electric

National Grid

Rebates

Mass Save

Permits

Town of Hanover building department

Energy code

Stretch energy code since January 1, 2011

## Inside a West Hanover raised-ranch conversion

Heat pump outdoor unit on a stand at the side of a raised ranch

Second return grille added in the upstairs bedroom hall

### Cold bedrooms, small panel

A 1971 raised ranch in West Hanover heats with a 25-year-old oil furnace on the lower level. The upstairs bedrooms run cold, there's one small return, and the service is the original 100 amps. The owner wants off oil and hopes to skip a service upgrade.

### Doing the panel math

The load comes to 31,200 BTU an hour at the design temperature, a 3-ton variable-speed unit. A panel load calculation with a staged 5 kW backup strip, the electric dryer and the rest of the house comes in under 100 amps, so the service stays. A 10 kW strip on a new 200-amp service is priced too, and set aside.

### The work

The furnace and coil come out and the air handler takes their place. A second 20-by-10 return in the upstairs hall, run through a closet, takes static from 0.88 to about 0.50 inch. Lower-level duct seams get mastic, and the outdoor unit sits on a stand by the front steps.

### Wrapping up

The 22-foot line set is pressure-tested, evacuated below 500 microns and charged by weight. Airflow is read in each bedroom, the backup stages are set to lock out above a chosen temperature, and the 275-gallon tank comes out under the fire department's permit. The Mass Save rebate runs through National Grid.

*Project facts*

| Service | Oil furnace to heat pump, kept on 100-amp service |
| --- | --- |
| Where | West Hanover |
| House | 1971 raised ranch, about 1,900 sq ft |
| Before | 25-year-old oil furnace, one upstairs return, 100-amp panel |
| After | 3-ton cold-climate heat pump with staged backup heat |
| Price | $19,700 before rebates, tank removal included |
| Time on site | Four working days |

## What brings people to us in Hanover

### A raised ranch with an oil furnace downstairs

The ducts were laid out for the furnace, and the upstairs rooms often come up short. A static check shows what to change before the heat pump goes in.

### A 100-amp panel you'd rather keep

A variable-speed heat pump with modest backup heat can fit on an older service. We run the load numbers before anyone suggests an upgrade.

### A gas furnace on Eversource Gas

Half of Hanover heats with gas. The Mass Save rebate for replacing it runs through Eversource Gas, while National Grid sends the electric bill.

Hanover sits on the inland edge of the state’s coastal zone, along the North River, but most of its houses are nowhere near salt air. What they share is newer construction and a lot of oil: more than a third of homes still burn it.

[Clement Boston Heat Pumps](https://clementbostonheatpumps.com/) designs heat pump installation in Hanover, MA around housing where fewer than one home in eleven predates 1940. Newer houses usually mean ducts, and whether those ducts and the panel are ready for a heat pump is what the first visit settles.

## Postwar houses, and ducts that need a second look

Most Hanover homes were built after 1940, many with an oil furnace and ducts from the start. That’s a head start, but the ducts were laid out for a furnace, not a heat pump.

### Why it matters

An oil furnace blows hot air in short bursts; a heat pump sends out milder air for longer, so it needs more airflow for the same heat. Ducts with small returns or long runs to the far rooms can’t carry that extra air quietly.

### What we check

Static pressure at the air handler, return size against the new airflow, leakage where ducts cross the garage or attic, and airflow at each register. The numbers decide whether we add a return, resize a trunk, or replace a run. See [heat pump ductwork](https://clementbostonheatpumps.com/heat-pump-ductwork/).

## Raised ranches and split-levels

Hanover has plenty of split-entry and split-level houses. Many put the furnace on the lower level, with the bedrooms upstairs at the end of the longest duct runs.

### The cold upstairs bedroom

Where an upper floor has supply registers but only one small return, air can’t circulate. Adding a return in the upstairs hall often fixes rooms that never kept up. We measure before and after.

### Ducts over the garage

Where a bedroom or bonus room sits over an unheated garage, its ducts often run through the garage ceiling. Those runs lose heat and leak. We seal and insulate them, or reroute through conditioned space when the framing allows.

### Lower-level rooms

The family room on the lower level of a raised ranch sits partly below grade and often runs cool. It may need its own supply runs and a return near the floor, which we plan into the same job.

### One system or two

A raised ranch usually needs only one system once the ducts are right. A larger split-level with a wing over the garage may need a second. Our [sizing guide](https://clementbostonheatpumps.com/guide/heat-pump-sizing/) explains how the load calculation decides.

## The panel question

Some Hanover houses still have 100-amp service. A heat pump doesn’t automatically mean an upgrade, and we don’t assume one.

| What drives the decision | What we do |
| --- | --- |
| Heat pump running draw | Check the unit’s rated current against the panel’s spare capacity |
| Backup heat strips | Size them small, or stage them, so they don’t overload the service |
| Other loads (range, dryer, well pump) | Run a load calculation on the whole panel |
| Result over capacity | Plan a 200-amp upgrade before the heat pump goes in |

If the numbers say upgrade, our typical range for going to 200 amps is $3,000 to $6,500; the utility bills its side separately. Variable-speed equipment draws less at startup and runs longer at low power, which keeps more houses on their existing service. See [panel upgrades](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/) and our [variable-speed guide](https://clementbostonheatpumps.com/guide/variable-speed-heat-pump/).

## Oil, gas and two utilities

About 36% of Hanover homes burn oil and about half use gas. National Grid supplies electricity; Eversource Gas supplies gas. Which one sponsors your Mass Save rebate depends on the fuel you’re replacing.

### Leaving oil

National Grid is the sponsor. The whole-home rebate is $2,650 a ton up to $8,500 for installs through 2026, with cold-climate listed equipment, a network installer, the oil system removed and proof of weatherization. The tank comes out after the heat pump carries the house; see [oil tank removal](https://clementbostonheatpumps.com/oil-tank-removal/) and [oil to heat pump conversion](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/).

### Leaving gas

Eversource Gas is the sponsor. Gas is the cheapest fuel per unit of heat, so the case rests on replacing a furnace and AC together and gaining one system for both. See [furnace to heat pump conversion](https://clementbostonheatpumps.com/furnace-to-heat-pump-conversion/).

## Sizing for a South Shore winter

Hanover’s winter nights run colder than Boston’s, away from the harbor’s moderating effect. The system has to carry the house on those nights without leaning on backup strips.

### The calculation

We run ACCA Manual J room by room at your town’s design temperature, with your actual windows, insulation and air leakage. The old furnace’s size doesn’t enter into it, since many were oversized from the start.

### The equipment

We choose equipment by its rated output at 5°F, which can be well below its nameplate. Backup heat covers the rare night below that and locks out above a set temperature. Our [backup heat guide](https://clementbostonheatpumps.com/guide/heat-pump-aux-heat/) explains the settings.

## Near the North River

Hanover is listed among Massachusetts’ coastal-zone towns, with the North River and Indian Head River along its edges. Salt air rarely reaches far inland, but riverside lots can sit in a flood zone.

Flood zones are checked per address, and outdoor equipment goes on a raised stand where one applies. Away from the rivers, a stand above drifting snow is enough; see our [placement guide](https://clementbostonheatpumps.com/guide/heat-pump-snow-stand/).

## Permits, code and rates in Hanover

The Town of Hanover’s building department issues the permits. The filing route, fees and any local noise rules are confirmed per address when we apply.

| What | The Hanover answer |
| --- | --- |
| Permits | Town building department: electrical, sheet metal, gas where capped |
| Energy code | Stretch code since January 1, 2011 |
| Electric utility | National Grid |
| Gas utility | Eversource Gas |
| Rebate program | Mass Save |
| Winter heat pump rate | National Grid, distribution charge only |

National Grid’s [winter heat pump rate](https://clementbostonheatpumps.com/guide/heat-pump-electric-rate-massachusetts/) lowers the distribution charge on all household kilowatt-hours from November 1 to April 30.

## The steps, from first visit to final readings

A Hanover job is mostly a measuring job up front. Once the ducts and panel numbers are in, the install itself is short.

- **On the first visit:** heat loss for each room, duct pressure and per-register airflow, a panel load check, how the tank comes out, and where the outdoor unit sits.
- **In the written estimate:** each unit’s 5°F output, the duct fixes, electrical, the tank, permits, which sponsor pays the rebate, and the price. Our [quote checklist](https://clementbostonheatpumps.com/guide/heat-pump-quote-checklist/) shows what to look for.
- **Install:** three to five working days on existing ducts.
- **At start-up:** the refrigerant circuit holds nitrogen pressure, is evacuated under 500 microns and charged by weight; we re-measure airflow and static against the first-visit readings and write down the backup heat cutoff.

[Norwell](https://clementbostonheatpumps.com/service-areas/norwell/) and [Rockland](https://clementbostonheatpumps.com/service-areas/rockland/) share Hanover’s National Grid electric service.

## Services in Hanover

- [Service**Oil to heat pump conversion** Retire the oil furnace or hydro-air boiler, cap the oil line and heat and cool through the ducts you have.](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/)
- [Service**Heat pump ductwork** Duct testing, sealing, new returns and resized runs so a heat pump gets the air it needs.](https://clementbostonheatpumps.com/heat-pump-ductwork/)
- [Service**Panel and service upgrades** A service load calculation first, and a 200-amp upgrade only when the heat pump and the house need it.](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/)
- [Service**Furnace to heat pump conversion** Take out the gas or propane furnace and heat and cool through the same ducts with a heat pump.](https://clementbostonheatpumps.com/furnace-to-heat-pump-conversion/)
- [Service**Whole-home heat pumps** One ducted system that heats and cools the whole house, with the furnace or boiler retired.](https://clementbostonheatpumps.com/whole-home-heat-pump/)
- [Service**Oil tank removal** The old basement tank pumped, cleaned, removed and permitted once the heat pump is running.](https://clementbostonheatpumps.com/oil-tank-removal/)

## How a job usually runs in Hanover

### First call

You tell us what heats and cools the house now, which rooms aren't working, and roughly where the house is.

### Home visit

We measure the house for a load calculation, test the ducts, check the panel and look for an outdoor spot.

### Written estimate

Equipment, duct changes, electrical, permits and the rebate path, line by line, with our price.

### Install

Permits first, then the work: usually two to five working days on site.

### Commissioning

Pressure test, vacuum, charge by weight, airflow and controls set before we call it done.

## Neighborhoods, landmarks and routes

- Hanover Center
- West Hanover
- North Hanover
- South Hanover
- Assinippi
- Hanover Four Corners

### Landmarks

- North River
- Indian Head River
- Luddam's Ford
- Hanover Mall

### Getting around

- Route 3
- Route 53
- Route 139
- Route 123

[Open Hanover, MA in Google Maps](https://www.google.com/maps/search/?api=1&query=Hanover%2C%20MA)

## Hanover: questions

### Can a Hanover house with 100-amp service run a ducted heat pump?

Often, yes. A variable-speed heat pump's running draw is modest, and the backup heat strips are what push a small panel over. We run a load calculation on your panel and size the backup heat before deciding whether an upgrade is needed.

### What does an oil-to-heat-pump switch cost in a Hanover ranch?

On ducts we can reuse, our typical range is $15,000 to $28,000 and up before rebates. A 200-amp service upgrade, if your panel needs one, runs $3,000 to $6,500, and an accessible tank comes out for $600 to $1,500. Mass Save's rebate comes through National Grid.

### Why are the upstairs rooms in my Hanover raised ranch always cold?

In many split-level and raised-ranch layouts, the furnace and ducts sit on the lower level and the upper rooms sit at the end of the longest runs, often with too little return air. We measure static pressure and airflow per room, then fix the ducts as part of the heat pump job.

### Who sponsors the Mass Save rebate for a gas-heated Hanover home?

Eversource Gas, the town's gas company. National Grid sponsors it for oil, propane and electric homes. The rebate amounts and conditions are the same either way.

### Do I need anything special because Hanover is a coastal-zone town?

For most Hanover houses, no; the town sits on the inland edge of the coastal zone along the North River. Near the river, flood zones are checked per address and outdoor equipment is raised where one applies.

## Nearby service areas

- [Service area**Norwell** Ducted heat pumps for Norwell homes heated by oil and propane deliveries, with National Grid's Mass Save rebate and outdoor units placed for wooded lots.](https://clementbostonheatpumps.com/service-areas/norwell/)
- [Service area**Rockland** Ducted heat pumps for Rockland's older houses and two-families on oil or gas, with small-duct options for plaster walls and National Grid on both meters.](https://clementbostonheatpumps.com/service-areas/rockland/)
- [Service area**Abington** Ducted heat pumps for Abington homes leaving oil or baseboard heat, with Mass Save rebates through National Grid and the utility's winter heat pump rate.](https://clementbostonheatpumps.com/service-areas/abington/)

## Guides for houses in Hanover

- [Decision Guide**Is a heat pump better than oil heat in Massachusetts?** Running cost worked out from Massachusetts fuel prices and winter heat pump rates, plus the comfort, cooling, tank and hot water questions that come with the switch.](https://clementbostonheatpumps.com/guide/heat-pump-vs-oil-heat/)
- [Learn**What size heat pump do I need?** Why square footage and the old unit's tonnage both mislead, what a room-by-room load calculation measures, and how the result turns into equipment.](https://clementbostonheatpumps.com/guide/heat-pump-sizing/)
- [Learn**Is a variable-speed heat pump worth it?** How an inverter compressor matches its output to the house, what that does for comfort, cycling and humidity, and when a simpler unit is enough.](https://clementbostonheatpumps.com/guide/variable-speed-heat-pump/)
- [Learn**How do Mass Save heat pump rebates work?** The three rebate tiers, the conditions behind each, the dates that change them, and what happens in towns with their own light plant.](https://clementbostonheatpumps.com/guide/mass-save-heat-pump-rebates/)
- [Decision Guide**What questions should I ask a heat pump installer before I sign?** Two quotes for the same house can describe very different jobs. These questions show you which one you're actually buying.](https://clementbostonheatpumps.com/guide/heat-pump-quote-checklist/)

## Get an estimate in Hanover

Tell us what heats the house now and which rooms aren't working in Hanover.

(857) 837-1475
