# Ducted heat pumps across Framingham, MA

> Ducted heat pumps for Framingham homes on electric heat, oil or gas, with Eversource on both meters, Mass Save rebates and the city's new specialized code.

URL: https://clementbostonheatpumps.com/service-areas/framingham/

Service area, Massachusetts

Ducted heat pumps for Framingham homes on electric heat, oil or gas, with Eversource on both meters, Mass Save rebates and the city's new specialized code.

(857) 837-1475

Last Updated: November 12, 2026

Electric

Eversource

Rebates

Mass Save

Permits

City of Framingham building department

Energy code

Specialized stretch code since July 1, 2026

## What a boiler-to-heat-pump job in Saxonville looks like

New supply trunk along the shared basement's joists

Outdoor unit on a stand beside the two-family's back stairs

### The building

A 1920s two-family in Saxonville where each floor has its own gas boiler. The first-floor owner's boiler, 30 years old, is leaking at a section, and window units are the only cooling. The upstairs unit's boiler shares the basement and stays exactly as it is.

### Ducts from below

The Manual J load for the first floor is 21,800 BTU/h. A 2-ton air handler in the basement feeds six rooms through floor registers off a new 38-foot trunk, with one return in the hall floor. Nothing in the plaster walls or ceilings needs opening.

### Working in a shared basement

The upstairs boiler's piping is isolated before the first-floor boiler and radiators come out, and a licensed gas fitter caps only the first-floor branch. Basement work is scheduled with the upstairs occupants. The outdoor unit goes on a stand in the narrow rear yard beside the back stairs.

### Price, time and rebate

The job is $22,700 before rebates over six working days, permitted through the city's OpenGov portal. Eversource supplies both electricity and gas here, so the whole-home rebate for replacing gas heat runs through Eversource Gas once the old boiler is out. Upstairs, the second-floor unit's heat carries on unchanged.

*Project facts*

| Service | Gas boiler to ducted heat pump, one unit |
| --- | --- |
| Where | Saxonville, Framingham |
| House | 1920s two-family, first-floor unit about 1,100 sq ft |
| Before | 30-year-old gas boiler and radiators |
| After | 2-ton heat pump with new basement ducts |
| Price | $22,700 before rebates |
| Time on site | Six working days |

## What brings people to us in Framingham

### An apartment or condo on baseboard

Close to three in ten Framingham homes heat with electricity. A compact ducted air handler moves two to three units of heat for each unit a baseboard makes.

### One floor of a two-family

Each unit gets its own system sized for its own floor, so the owner upstairs and the owner down below each control their own heat.

### A renovation after July 1, 2026

Framingham's major renovations and new homes now follow the specialized code, so the new space is planned around electric heat from the start.

### An oil furnace in a Nobscot ranch

The furnace ducts usually carry heat pump air once we measure them, and the tank comes out when the heat pump takes over.

Close to three in ten Framingham homes heat with electricity, more than in Natick, Wayland, Sudbury or Weston. The city also moved to the specialized energy code on July 1, 2026, which changes how its renovations get heated.

[Clement Boston Heat Pumps](https://clementbostonheatpumps.com/) handles heat pump installation in Framingham, MA for both sides of that: apartments and condos replacing baseboard, and houses and two-families leaving oil or gas behind.

## Electric heat across the city

About 28.6% of Framingham homes heat with electricity, among the highest shares in the towns we cover. In apartments and condos, that usually means baseboard or wall heaters, the costliest heat to run besides oil.

### Why baseboard homes gain the most

A baseboard heater turns one kilowatt-hour into one unit of heat. A ducted heat pump moves two to three units for that kilowatt-hour on a typical winter day, and adds central cooling. See [baseboard heat to heat pump](https://clementbostonheatpumps.com/baseboard-heat-to-heat-pump/).

### Eversource’s seasonal rate

Once you heat with a heat pump, Eversource’s seasonal rate lowers distribution and transmission charges on every household kilowatt-hour from November 1 to April 30. Mass Save rebate recipients are usually enrolled automatically; see the [winter rate guide](https://clementbostonheatpumps.com/guide/heat-pump-electric-rate-massachusetts/).

### Inside a condo

A compact air handler fits a hall closet or a dropped ceiling, with short ducts to each room and one return in the hall. The association decides where the outdoor unit goes, and in a larger building that can mean a roof or a common pad; our [condo guide](https://clementbostonheatpumps.com/guide/condo-heat-pump-replacement/) covers the approval.

## What changed on July 1, 2026

Framingham adopted the specialized energy code, effective July 1, 2026, after years on the stretch code. It reaches new homes and major renovations, not a straight heating replacement.

- **New homes and additions:** the specialized paths favor all-electric heat or wiring for it, so the heat pump is designed in with the framing.
- **Gut renovations:** ducts go in while walls and ceilings are open, which is far cheaper than fishing them through finished rooms.
- **Replacing heat in an existing home:** a mechanical job with an electrical permit and, where ducts change, a sheet metal permit.

## Two-families, ranches and apartment buildings

Framingham’s housing is mixed. About 52% of homes are detached houses, 7% sit in three- or four-unit buildings, and nearly a third in buildings of five or more units. About 17% predate 1940.

### Two-families and three-unit houses

Where an older two- or three-unit house in Saxonville, Coburnville or near downtown heats each floor with its own boiler, each unit gets its own system sized for its own floor, with the air handler in the basement, a closet or the attic. Our [triple-decker guide](https://clementbostonheatpumps.com/guide/triple-decker-heat-pumps/) covers stacked units.

### Ranches and capes

Where a post-war ranch or cape has a warm-air furnace, its ducts can usually carry heat pump air after we measure static pressure and size the returns. A cape’s knee walls often give the upstairs a duct route; see [whole-home heat pumps](https://clementbostonheatpumps.com/whole-home-heat-pump/).

### Older houses with radiators

A boiler house has no ducts. A basement air handler serves the first floor and an attic unit the bedrooms; see [boiler to heat pump conversion](https://clementbostonheatpumps.com/boiler-to-heat-pump-conversion/) and [heat pump ductwork](https://clementbostonheatpumps.com/heat-pump-ductwork/).

## Oil, gas and the panel

Gas heats about 46% of Framingham homes and oil about 21%. Eversource supplies the gas as well as the electricity, so every fuel applies to Mass Save through the same company.

### Leaving oil

Oil is the costliest common fuel per delivered BTU after electric resistance. A cold-climate heat pump on the winter rate costs less, and an accessible basement tank comes out for $600 to $1,500 in our typical range; see [heat pump vs oil](https://clementbostonheatpumps.com/guide/heat-pump-vs-oil-heat/).

### Gas homes

Gas stays the cheapest fuel per BTU. A gas-heated house switches mainly for central cooling or because the boiler or furnace is near the end, and the whole-home rebate applies once it comes out. We put both running costs on your own bills, so the comparison is about your house.

### Sizing for an inland winter

Framingham sits about twenty miles inland, where clear January nights run colder than at Logan Airport. We size from a room-by-room Manual J at the design temperature for your address and list each unit’s capacity at 5°F, so backup strips stay a backup. Our [sizing guide](https://clementbostonheatpumps.com/guide/heat-pump-sizing/) explains the method.

### The electrical service

Where an older two-family runs on a small service, the new circuits may not fit. We run a load check per unit, and if an upgrade is needed, our typical range for 100 to 200 amps is $3,000 to $6,500; see [panel upgrades](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/).

## Framingham’s permits, code and rebates in a table

The city’s building department takes permit applications through OpenGov. Outdoor unit setbacks and sound rules are confirmed per address before we file.

| What | The Framingham figure |
| --- | --- |
| Electric and gas company | Eversource for both |
| Energy code | Specialized code since July 1, 2026 |
| Heating fuel | Gas 45.8%, electricity 28.6%, oil 21.2%, propane 2.2% |
| Homes in buildings of five or more units | About 32% |
| Online permits | OpenGov |
| Mass Save whole-home rebate | $2,650 a ton up to $8,500 through December 31, 2026 |

From January 1, 2027, the whole-home tier pays $2,350 a ton up to $7,500. Mass Save’s 0% HEAT Loan covers up to $25,000, applied for before work; see the [HEAT Loan guide](https://clementbostonheatpumps.com/guide/mass-save-heat-loan-heat-pump/).

## Steps on a Framingham install

The first visit measures each room’s heat loss, finds the route for ducts or checks the ones you have, looks at the panel for each unit, and picks an outdoor spot clear of snow and the neighbor’s windows.

1. **Written estimate:** equipment and its capacity at 5°F, ductwork, electrical, permits, and the Mass Save path for your fuel.
2. **OpenGov permits,** and board approval for a condo, then three to seven working days on site.
3. **Old heat out:** baseboard removed, or the boiler or furnace taken out and gas capped by a licensed gas fitter.
4. **Commissioning:** pressure test, deep vacuum, charge by weight, airflow at the registers, backup lockout recorded.

[Natick](https://clementbostonheatpumps.com/service-areas/natick/) to the east has a similar mix of condos and houses, and [Sudbury](https://clementbostonheatpumps.com/service-areas/sudbury/) to the north is mostly detached houses on Eversource.

## Services in Framingham

- [Service**Baseboard heat to heat pump** Replace electric baseboard with a ducted heat pump that heats on far less electricity and cools too.](https://clementbostonheatpumps.com/baseboard-heat-to-heat-pump/)
- [Service**Boiler to heat pump conversion** New ducts or small-duct high-velocity runs so a heat pump can heat and cool a radiator house.](https://clementbostonheatpumps.com/boiler-to-heat-pump-conversion/)
- [Service**Oil to heat pump conversion** Retire the oil furnace or hydro-air boiler, cap the oil line and heat and cool through the ducts you have.](https://clementbostonheatpumps.com/oil-to-heat-pump-conversion/)
- [Service**Whole-home heat pumps** One ducted system that heats and cools the whole house, with the furnace or boiler retired.](https://clementbostonheatpumps.com/whole-home-heat-pump/)
- [Service**Heat pump ductwork** Duct testing, sealing, new returns and resized runs so a heat pump gets the air it needs.](https://clementbostonheatpumps.com/heat-pump-ductwork/)
- [Service**Panel and service upgrades** A service load calculation first, and a 200-amp upgrade only when the heat pump and the house need it.](https://clementbostonheatpumps.com/electrical-panel-upgrade-for-heat-pump/)

## How a job usually runs in Framingham

### First call

You tell us what heats and cools the house now, which rooms aren't working, and roughly where the house is.

### Home visit

We measure the house for a load calculation, test the ducts, check the panel and look for an outdoor spot.

### Written estimate

Equipment, duct changes, electrical, permits and the rebate path, line by line, with our price.

### Install

Permits first, then the work: usually two to five working days on site.

### Commissioning

Pressure test, vacuum, charge by weight, airflow and controls set before we call it done.

## Neighborhoods, landmarks and routes

- Downtown Framingham
- Framingham Centre
- Saxonville
- Nobscot
- Pinefield
- Coburnville

### Landmarks

- Farm Pond
- Callahan State Park
- Lake Cochituate
- Sudbury River
- Framingham State University

### Getting around

- Route 9
- Route 30
- Route 126
- Route 135
- Interstate 90

[Open Framingham, MA in Google Maps](https://www.google.com/maps/search/?api=1&query=Framingham%2C%20MA)

## Framingham: questions

### What changed for Framingham heat pump jobs on July 1, 2026?

Framingham's specialized energy code took effect. It sets requirements for new homes and major renovations, pushing toward all-electric heat or pre-wiring for it. Replacing the heat in an existing home is still a mechanical job with the usual permits.

### What does a ducted heat pump cost for one unit of a Framingham two-family?

If the unit heats with a boiler and radiators, it needs new ducts, where our typical range is $20,000 to $40,000 and up before rebates; a single floor sits toward the low end. Mass Save's whole-home rebate through Eversource is $2,650 a ton up to $8,500 through December 31, 2026.

### Is Framingham on Eversource for both electricity and gas?

Yes. The state's utility lookup lists Eversource for electricity and Eversource Gas for gas in Framingham, so every heating fuel, gas included, applies to Mass Save through Eversource. Homes on electric heat also get Eversource's seasonal heat pump rate after the switch.

### How do I file for a heat pump permit in Framingham?

Framingham takes permit applications through its OpenGov portal, and we file them there. Most jobs need an electrical permit, with sheet metal and gas permits added when ducts change or a licensed gas fitter caps a line.

### Can I finance a Framingham heat pump at 0%?

Mass Save's HEAT Loan offers 0% financing up to $25,000 through participating lenders for qualifying heat pump work. You apply before the work starts, and the lender, not us, sets the terms.

## Nearby service areas

- [Service area**Natick** Ducted heat pumps for Natick condos on electric baseboard and houses on oil or gas, with Mass Save through Eversource, OpenGov permits and the specialized code.](https://clementbostonheatpumps.com/service-areas/natick/)
- [Service area**Sudbury** Ducted heat pumps for Sudbury colonials heated by propane, oil or gas, with Mass Save rebates through Eversource, the winter rate and ViewPoint permits.](https://clementbostonheatpumps.com/service-areas/sudbury/)
- [Service area**Wayland** Ducted heat pumps for Wayland ranches and colonials on oil or gas, with Mass Save through Eversource or the gas company on your bill and the specialized code.](https://clementbostonheatpumps.com/service-areas/wayland/)

## Guides for houses in Framingham

- [Learn**How does the heat pump electric rate work in Massachusetts?** Which part of your electric bill the seasonal rate lowers, why it applies to the whole house, how enrollment works, and what it means for the switch from oil or gas.](https://clementbostonheatpumps.com/guide/heat-pump-electric-rate-massachusetts/)
- [Decision Guide**How do you put heat pumps in a triple-decker?** Three stacked homes under one roof, often with three owners, three meters and one narrow side yard. Here's how a heat pump job works around that.](https://clementbostonheatpumps.com/guide/triple-decker-heat-pumps/)
- [Decision Guide**What's involved in replacing a heat pump in a condo?** In a condo, the outdoor unit usually sits on common property, so the association, the master deed and sometimes a historic commission come before equipment.](https://clementbostonheatpumps.com/guide/condo-heat-pump-replacement/)
- [Decision Guide**Is a heat pump better than oil heat in Massachusetts?** Running cost worked out from Massachusetts fuel prices and winter heat pump rates, plus the comfort, cooling, tank and hot water questions that come with the switch.](https://clementbostonheatpumps.com/guide/heat-pump-vs-oil-heat/)
- [Learn**How does the Mass Save HEAT Loan work for a heat pump?** A 0% loan through participating banks and credit unions, the steps that have to happen before the work starts, and where it stops covering a job.](https://clementbostonheatpumps.com/guide/mass-save-heat-loan-heat-pump/)

## Get an estimate in Framingham

Tell us what heats the house now and which rooms aren't working in Framingham.

(857) 837-1475
